No$psx v1.9

PS模擬器 No$psx 發布新版，更新如下:

28 May 2014 no$psx v1.9

webpage: moved from http://nocash.emubase.de/ to http://problemkaputt.de/

hc05: low-level cdrom sub-cpu emulation (motorola mc68hc05 with cdrom bios)

hc05: setup: allows to select new low-level emu, older/faster high-level emu

hc05: setup: ignores hc05 low-level option if file MC68HC05.ROM is missing

hc05: setup: forces reset when changing between low-level and high-level emu

hc05: setup: prevents skipping mips-bios-intro in low-level cdrom emulation

hc05: cpu: emulates motorola hc05 opcodes and hc05 onchip I/O ports and timer2

hc05: cpu: switches between mips/hc05 (on interval and on 1F80180xh access)

hc05: io: emulates servo amplifier and signal processor CX(nn) commands

hc05: io: emulates servo/signal SENSE result (with SERIAL SENSE on new chips)

hc05: io: emulates decoder cmd/param/reply fifos and sector data transfers

hc05: io: emulates SUBQ spi bus transfers (for position and table of contents)

hc05: scex: simulates serial scex bitstream (when DISK,near POS0,SINGLE speed)

hc05: scex: simulates new subq channel "encrypted" scex signal (version vC3)

hc05: disc: creates SUBQ data for TOC (with point A0h,A1h,A2h,01h..NNh)

hc05: disc: skips nonsense track 0 (lead-in) entries in .nrg "CUES" chunks

hc05: sled-mech: supports sled move via FastSled and TrackJump commands

hc05: sled-mech: supports sled brake (with reduced kick and move voltages)

hc05: sled-mech: computes non-linear sector number versus sled seek distance

hc05: mech: simulates DOOR OPEN switch period (required to sense disc changes)

hc05: mech: simulates POS0 switch (required for sled reverse lead-in seeking)

hc05: mech: nag feature: simulates GFS=bad on spindle speed change (eg.spinup)

hc05: mech: nag feature: forces GFS=bad and FOK=bad when disc missing

hc05: audio: forwards xa-adpcm data (on adpmnt) and cd-da data (when demuted)

hc05: tty: logs incoming cmd/param fifo and outgoing irq/reply fifo transfers

hc05: tty: logs CX(nn) commands (with description on known command/params)

hc05: tty: logs most recent MM:SS:FF alongsides with CX(nn) commands

hc05: bios: cdrom-image-loader treats 16.5K ".ROM" files as cdrom bios-images

hc05: bios: autodetects chipset and oscillator (via CXDnnnn strings in BIOS)

hc05: debug: supports f6-key set pc, f4-key break, f7-key trace

hc05: debug: ctrl+t toggle between MIPS and HC05 debug view (if low level on)

hc05: debug: optional bad I/O warnings (with CODE window moved to fault addr)

hc05: debug: integrated low-level mode in debugger (re_read_io, vac, iomap)

hc05: snapshots: saves hc05 registers and memory and low-level/chipset type

hc05: help: added summary of used CX(nn) values for vC1,vC2,vC3 versions

hc05: help: add notes on sled motor control methods (move, brake, nonlinear)

hc05: help: add info on vC3 specials (TzcOut, NewScex, CX(nn0000)-padding)

hc05: help: add info on oscillator clocks, and openbus-reading effects

hc05: help: add motorola bootstrap info and cdrom bios dumping info/link

cdrom: doesn't set stat.read/play bits until seek completion (gran turismo 1)

cdrom: slightly more accurate setloc (kept pending after seek_l/seek_p)

cdrom: computes average time per seek distance (faster than real hw though)

help: added note on DTL-H2000 using a Sony SPC700 sub-cpu (not Motorola HC05)

setup: allows to select 0,1,2,or 8 memcards (workaround for problem in "One")

debug: optional MIPS and HC05 tracelog function in TTY window (as in no$sns)

debug: new TTY buffer size option (1/10/100MB limit, with optional stop/wrap)

debug: resolves ASCII datazones and a0h/b0h/c0h jump lists for DTL-H2000 bios

tty: added "tty_force_newline" at begin of auto-generated (non-user) lines

cdrom: always uses low-level sector buffer (removed high-level buffer relicts)

help: added info on DTL-H2000 memory and atcons/dip/led/etc I/O ports

help: added 176-pin CXD2941R pinouts (SPU+CDROM+SPU_RAM on PM-41(2) boards)

help: notes on missing cdrom commands in vC0 (1Dh+1Eh+5xh + 19h,22h..25h/7xh)

help: fixed apu min/max typos, and cpu j/jal F0000000 typo (thanks mitikoro)

help: note on cache/cop0 info in LR3330/L64360 datasheets (thanks LostTemplar)

a22i: added ".pack_crc32 result,initial" directive (use with ".pack_org")

a22i: added ".pack_chksum_xor8bit result" and ".pack_chksum_add8bit result"

snapshot: bugfix: removed duplicated "SECT" chunk name (cdrom sector buffer)

help: added new "PSX Dev-Board Chipsets" chapter (for DTL-Hnnnn boards, etc)

debug: fixed tty bios patch for cex-1000 (opcode 0FF019CDh instead 0FF019E1h)

bios: gui doesn't mute cd-audio (eg. required for games like wipeout 2097)

bios: recognizes GetID result for unlicensed mode2 disks WITH audio tracks

debug: allows editing values in REGS window (alternately rx=nn in CODE window)

bios clone: sends secret unlock commands (works/tested: boots without modchip)

a22i: added mc68hc05 assembler (for testing/re-assembling cdrom sub-cpu bios)

a22i: resurrected nocash-syntax in online assembler (if disass in nocash mode)

help: hardware numbers: added sony's DTL-Hxxxx developer tool hardware numbers

gpu/dma2: pre-checks linked-list size (and abort/warn if endless-link-chain)

spu: supports multi-block manual ram write (repeated spucnt=C010h; bios intro)

spu/irq: emulates i_stat edge-triggering (gex,finalfantasy9,tokimekimemorial2)

cdrom/irq: emulates i_stat edge-triggering (though rarely needed in practice)

emu: emulates dirt effects on 8bit/16bit/32bit writes to various I/O ports

help: added details on multi-block manual spu ram writes, and on spu ram addr

help: extra note on I_STAT bits being edge triggered (was already mentioned)

help: unpredictable things: added details on 8bit/16bit/32bit write effects

help: memctrl correction: 1F801020h.16-17 and FFFE0130h.8,11-31 are fully R/W

spu: ignores writes to "read-only" registers (SPUSTAT and ENDX voice flags)

http://problemkaputt.de/